Guide
Sew-in closure: braid down, place the closure and sew it flat
A full sew-in with no leave-out: the braid base, the wefts and a closure stitched flat at the hairline.
Published
A sew in closure is a full sew-in where a small piece of lace or silk with hair ventilated into it sits at the front of the part, so none of your natural hair is left out. All of your hair is braided down, the wefts are sewn onto the braids, and the closure is stitched on last to give a part that looks like it grows from the scalp. This guide covers choosing the closure, the braid base, sewing the wefts, placing and stitching the closure, and the care and removal that follow.
What you'll need
Essentials
-
Lace or silk-base closure
: covers the part area so none of your own hair is left out. -
Hair wefts (bundles)
: two bundles up to 14 inches or three at 16 inches and longer, per Mayvenn's guide. -
Curved weaving needle (C or J)
: scoops under the cornrow without pulling the hair taut or scratching the scalp. -
Weaving thread in a color close to the hair
: bonded nylon or polyester is the usual choice for strength. -
Rat-tail comb, clips and braiding gel
: clean parts and flat cornrows for the base. -
Thread scissors or a seam ripper
: trim thread ends now and cut stitches at removal.
Optional
-
Weave net
: spreads weft weight across the head and gives an even sewing surface. -
T-pins or bobby pins
: hold the closure in place while you stitch the front. -
Lace tint or foundation powder
: brings the lace closer to your scalp color.
Choose your closure
Size
Closures are named by their width and depth in inches. Mayvenn's guide lists 2x6, 4x4, 5x5, 6x6 and 7x7, and calls 4x4 and 5x5 the two most worn. The 5x5 gives you more room to move the part for a small price increase. Private Label Extensions notes that a deeper closure lets you part further back and a wider one gives more side-part options, and suggests measuring where the closure will sit on your head before buying.
A frontal is the ear-to-ear version, usually 13x4 inches. It lets you part anywhere and wear the hair pulled back, but it costs more and needs its edges laid every few days. The rest of this guide is about closures. A frontal sew-in sews the wefts the same way, but it sits on straight-back cornrows instead of a beehive, as the braid pattern guide shows.
Lace and color
Mayvenn's guide calls transparent lace the practical default; HD lace melts closer to the scalp but is more delicate to install and take down. Whichever you pick, match the closure's hair color and texture to your bundles, and plan to tint the lace toward your skin tone if it does not already blend.
Braid the base
The closure needs a flat surface to lie on. That is why closure installs use a beehive base rather than straight-back rows.
Middle part closure sew in
Braid a centered beehive: cornrows that circle the head and spiral toward the crown, with the end coiled in the center and sewn flat. Mayvenn's guide gives 6 to 8 cornrows and roughly 30 to 45 minutes for this pattern. Fewer, flatter braids are better here, because every braid under the lace can show as a bump.
Side part closure sew in
Use the same spiral but move its center toward the side you will part on, so the closure sits with more hair on one side. Rotate which side you part on from one install to the next.
Keep tension light
Braid from the perimeter in, keeping each cornrow flat and even. The AAD says cornrows should not be tight, especially around the hairline, and that pain means a style is too tight. Tight braids can damage the hairline over time; if you notice thinning, see a board-certified dermatologist. The braid pattern guide has more layouts.
Sew the wefts

Optional: lay a weave net
Some stylists sew a breathable net over the braids first. The net spreads the weight of the wefts over the whole head and gives you an even surface to sew into. Stitch it around the outer perimeter and trim it away where the closure will sit.
Start at the nape
- Thread a curved needle with about an arm's length of thread, double it and knot the end.
- Lock the thread to the first cornrow at the nape: pass under the braid, loop the thread around the needle and pull tight.
- Lay the weft along the braid and sew through the weft band and under the braid, spacing stitches roughly 1/4 inch apart, as the study guide describes for an overcast stitch.
- Add a lock stitch at the start and end of every track, and a double lock (two wraps around the needle) in high-tension spots like the temples and nape.
- At turns, fold the weft rather than cutting it; cut wefts unravel unless they are sealed.
The needle and thread guide explains which needle shape and thread to choose.
Follow the spiral up
Keep sewing tracks along the braids, working around and up the head. Keep tracks close together so there are no gaps. Stop when you reach the area the closure will cover; the last weft circles that area so the closure edges sit on hair, not on bare braids.
Place and stitch the closure
Trim and position
Private Label Extensions suggests trimming the lace so about a centimeter remains around the two sides and the back of the closure. Set the closure so its front edge lines up with your natural hairline, and check the part sits where you want it. Pin one side to hold it.
Stitch it down
Following the Private Label Extensions method:
- Make a horizontal part just behind the closure's front edge.
- Sew across the front from left to right and back again, catching the lace and the braid underneath. Keep stitches small and close to the lace edge so they hide under the hair.
- Stitch down each side toward the back.
- Stitch across the back edge to the last weft.
Pull each stitch snug enough to hold the lace flat but not so hard it puckers. If the closure lifts later, add a few more stitches where it lifts.
Blend the closure
Tint the lace if it shows lighter than your scalp, and pluck the part line lightly if the density looks heavy; go slowly, because over-plucked spots cannot be filled back in. Then cut and style: bob closure sew in styles are cut after the install, so you can shape the bob to your face.
Sew-in closure styles
The closure decides where you can part:
- Middle part: works with any closure size.
- Side part: easiest with a 5x5 or larger, so the part can move off-center.
- Bob or layered cut: cut after the install; shorter lengths need fewer bundles.
- Ponytails and updos: Mayvenn's closure guide notes a closure does not allow these, since only the part area is covered and pulled-back hair exposes the tracks. A frontal or a vixen install suits pulled-back styles better.
Common mistakes
- Bulky braids under the closure. Every ridge shows through the lace.
- Closure placed past the hairline. Line the front edge up with your natural hairline; any further forward and the lace sits on bare skin, where it is harder to hide.
- Over-plucking. Thin spots at the part are hard to undo.
- Tight braids at the hairline. Painful and risky; loosen them.
- Wearing it too long. The study guide advises no longer than 6 to 8 weeks.
Care and removal
Wrap the hair at night and wash the scalp gently between the tracks. Remove the install right away if it causes pain or scalp irritation, as the AAD advises for weaves.
To take it down, work in good light. Snip only the thread loops with a seam ripper or blunt-tipped scissors, lift the closure and wefts off, then unbraid. The study guide warns to comb out trapped shed hair before water touches it, since wetting it first causes matting. Wash, deep condition and give your hair a rest before the next install.
Not sure whether a closure is right for you? The leave-out vs no leave-out comparison sets it against leave-out and frontal sew-ins, and the quick weave guide covers a faster glued option.
Questions
What size closure should I get for a sew-in?
Mayvenn's guide calls 4x4 and 5x5 the two most worn closure sizes, with 5x5 giving more room to move the part. Larger 6x6 and 7x7 closures let you part further back and to the side.
How many bundles do I need for a closure sew-in?
Mayvenn's guide suggests two bundles for lengths up to 14 inches and three bundles for 16 inches and longer, plus the closure. Fuller looks or very long lengths can take more.
How long does a closure sew-in last?
A natural hair stylist study guide advises keeping sew-ins in no longer than 6 to 8 weeks, since longer wear can lead to matting at the roots and scalp irritation. Plan to take it down within that window.
Can you do a side part with a closure sew-in?
Yes. For a side part, braid an offset beehive so the flat center sits off to one side, and place a closure large enough to part where you want it, such as a 5x5 or larger.
What is the difference between a closure and a frontal sew-in?
A closure covers a square or rectangle at the front of the part, usually 4x4 or 5x5 inches. A frontal runs ear to ear, usually 13x4 inches, so you can part anywhere and pull hair back, but it costs more and needs more upkeep.
Sources
- Mayvenn — Closure vs Frontal: What's the Difference?
- Mayvenn — Sew-In Braid Patterns: 6 Braid Downs for Every Install
- Private Label Extensions — What Is Closure Sew-In and How to Install One
- Open Exam Prep — Weaving and sew-in techniques (natural hair stylist study guide)
- American Academy of Dermatology — Hairstyles that pull can lead to hair loss
Read next
Braid pattern for sew-in weave: straight-back, beehive, vixen and leave-out layouts
Which braid down goes under which install, how many cornrows it takes, and how to keep it flat and gentle on your edges.
Hair sewing needle and thread: C, J, L and straight needles, cotton vs nylon thread
Which needle shape fits which job, why most stylists sew with bonded synthetic thread, and how to match thread to the hair.
Closure wig vs frontal wig: sizes, parting, install and upkeep compared
A closure gives you a small patch of lace and an easy install; a frontal gives you lace ear to ear and more ways to part and pull the hair back.