Skip to content
Weave Assist Studio

Buying guide

Wig grip band guide: velvet, silicone and gel grips compared

Velvet, silicone or gel: how each grip holds a wig, how to wear it so the nap works for you, and how to keep it clean.

Published

A woman with curly blonde hair presses her fingertips to a colorful patterned band worn at her hairline
Photo: Andy Barbour / Pexels

A wig grip band is a soft headband worn around the hairline under a wig. It keeps the wig from sliding back or shifting without glue, tape or clips. Most are velvet with a hook-and-loop closure at the back; others are lined with silicone or filled with gel. This guide explains how each type holds, how to choose the size and color, how to wear the band so it actually grips, and how to wash it so it keeps working.

How a wig grip holds a wig

UNice describes a wig grip simply as a fabric band worn under a wig to prevent it from slipping, a way to hold the wig without glue, tape or metal clips. The hold comes from friction in one of two places:

  • Against the wig. Velvet or velour has a nap, a direction to its fibers. Headcovers says its velour Wig Gripper uses the fabric's gentle nap to grip the wig cap or scarf on top of it.
  • Against the skin. Silicone strips and gel bands cling to the skin. Headcovers says its gel-filled Cushion Band grips securely to the skin to hold the wig in place.

Either way, the band sits under the edge of the wig cap at the hairline, where the wig is most likely to slide.

Types of wig grip

Velvet and velour grip bands

The most common wig grip band is a strip of velvet or velour, a couple of inches wide, with an adjustable hook-and-loop closure at the nape. Headcovers' Wig Gripper uses soft, breathable velour with an adjustable Velcro closure at the back. Milano's WiGrip has an adjustable back, comes in black, brown and tan, and sits completely under the wig. Velvet grips are light, inexpensive and work under most wigs, including glueless lace wigs.

Silicone-lined grip bands

Some bands combine velvet with a silicone strip. Amy Gibson's WigSECURE, for example, is a velvety band lined with a silicone non-slip strip, 2 to 2.5 inches wide, one size, in Beige-Blonde and Brunette. It is reversible: the maker says to wear the silicone strip against your head for an anti-slide hold, or flip it so the strip faces the wig if you have hair.

Gel cushion bands

A gel band is a soft band filled with clear gel that conforms to the head. Headcovers' Cushion Band is sold in two sizes, average (21.5 to 22.5 inches) and petite (under 21.5 inches), was designed for people going through chemotherapy, and is cleaned with a disinfectant. Headcovers also says it spreads the wig's weight evenly and feels cool. These suit wearers with little or no hair who find a fabric band itchy or tight.

Grip caps

A grip cap is a wig cap with a grip band built into the front. Milano's GripCap pairs a soft, moisture-wicking cap with its WiGrip band, in lace versions for lace-top wigs and plain versions for silk-top wigs. It is one layer instead of two, and Milano describes the cap fabric as moisture-wicking. More cap options are in our guide to wig caps.

Comparison of wig grip types

Type Grips against Closure Feel Best for
Velvet / velour band The wig cap Hook-and-loop at the nape Soft, light, can feel warm Glueless lace wigs, everyday wear over hair
Velvet with silicone strip Skin or wig (reversible) Adjustable Silicone against skin or wig Bare scalps, active days, wigs that keep sliding
Gel cushion band Skin Slip-on, sized Cool, cushioned Hair loss, sensitive or tender scalps
Grip cap The wig cap Built into cap One layer Hot weather, quick routines
Close-up of dark velvet fabric in soft folds, its pile catching the light
Photo: Marina Leonova / Pexels

What to look at before you buy

Size and adjustability

Most velvet grips are sold one size fits all and adjust at the back. That covers many heads, but petite and large heads do not always fit well; if the closure barely overlaps or the band wraps past the end of the hook strip, look for a band in your size. Gel bands come sized: Headcovers splits its Cushion Band at 21.5 inches. To measure, run a soft tape around your hairline from mid-forehead, behind the ears and around the nape.

Color

Pick a color close to your skin tone or to the wig's parting. Headcovers and UNice both advise matching the band so it blends in. Under a lace front, a skin-tone band at the hairline shows least; under a full wig with no lace at the front, a band close to the wig color is fine.

Width

Wider bands spread the pressure and grip more cap, but they are warmer and can show under very short or swept-back styles. WigSECURE, for example, lists a width of 2 to 2.5 inches.

Velvet or silicone

If you have hair at the hairline, a velvet band under the wig cap is often enough. If you have little or no hair, a band that grips the skin is the other option: WigSECURE's maker suggests the silicone side against the head for that, and Headcovers' gel Cushion Band was designed for chemotherapy patients. A reversible band lets you try both.

How to wear a wig grip band

  1. Prepare your hair: braid, wrap or slick it back, and put on a wig cap if you wear one.
  2. Place the band around your head slightly behind your natural hairline. UNice says to place it slightly behind the hairline with the smooth side against the hairline and the textured side toward the wig.
  3. Close the band at the nape snug, not tight. You should not feel pressure at the temples.
  4. Put the wig on over the band and line the front up with your hairline. The edge of the band should be hidden under the cap, not under the lace.

If the wig still slides, UNice suggests checking that the band is not inside out and is not too loose. Milano notes its band can stretch with frequent wear, so retighten it as needed.

Comfort and your edges

A grip can protect the hairline by keeping the wig cap from rubbing it, but a band worn too tight can cause tension headaches and pressure on the edges. UNice also notes a band can feel bulky and hot in summer. Loosen the band if you feel pressure, give your hairline a break between wears, and see a dermatologist if you notice thinning or soreness at the edges.

Which grip suits whom

  • Glueless lace wig wearers: a velvet band in your skin tone.
  • Wearers with little or no hair: a silicone-lined or gel band against the skin.
  • Active days and windy weather: UNice suggests grips for exercise and wind; a silicone-lined band adds hold.
  • Hot climates: a thin velvet band or a grip cap instead of a separate cap and band.
  • Stylists: keep a few velvet bands in neutral shades in the kit for installs and fittings.

Washing and replacing a wig grip

Grips lose hold as they collect skin oil, sweat and styling product. UNice says a quick wash with gentle shampoo can restore a band's holding power.

  • Velvet bands: follow the label; fabric bands are usually hand-washed in lukewarm water with a gentle shampoo, rinsed, pressed in a towel and air-dried. Close the hook-and-loop before washing so it does not snag the velvet.
  • Gel bands: wipe clean; Headcovers says its Cushion Band cleans easily with a disinfectant.
  • Grip caps: wash like a fabric wig cap, following the label.

Replace a band when the velvet is flattened or bald in patches, the hook-and-loop no longer holds, or the elastic has stretched past the point of retightening. Keeping two bands lets you wear one while the other dries.

For storing the wig between wears, see mannequin heads and wig stands. More care guides are in wig care.

Questions

How does a wig grip band work?

A wig grip is a soft band worn around the hairline under a wig. Velvet grips use the nap of the fabric to create friction against the wig cap, while silicone and gel bands grip the skin, so the wig stays in place without glue, tape or clips.

Which side of a velvet wig grip goes against the head?

Follow the maker's instructions, since bands differ. UNice, for example, says to place the smooth side against the hairline and the textured side toward the wig. If the wig still slides, check that the band is not inside out and not too loose.

Can you wear a wig grip with a lace front wig?

Yes. Place the grip slightly behind your natural hairline so it sits under the cap but not under the lace, and choose a color close to your skin so it does not show through. A grip is one way to wear a glueless lace wig without adhesive.

How do I wash a wig grip band?

Follow the label. Fabric grips are usually hand-washed with a gentle shampoo and air-dried; UNice says a wash removes the oil and sweat that make a grip lose its hold. Headcovers says its gel Cushion Band cleans with a disinfectant.

Can a wig grip cause headaches?

It can if it is too tight; UNice notes a band pulled too tight can cause tension headaches and pressure on the edges. Wear it snug enough to stay put but loose enough that you do not feel pressure at the temples, and loosen it if you get a headache.

Sources

  • UNice — Frequently asked questions about wig grips
  • Headcovers.com — Wig Gripper headband
  • Headcovers.com — How to hold your wig in place: 4 ways
  • Headcovers.com — Cushion Band gel headband
  • Wigs.com — Amy Gibson WigSECURE reversible non-slip grip band
  • Milano Collection — Original WiGrip
  • Milano Collection — GripCap
  • Headcovers.com — How to put on a wig