Buying guide
Mannequin head for wigs: foam, canvas and training heads compared
A foam head, a canvas block and a training head with hair do three different jobs. Here is which one you need and what to check before buying.
Published
"Mannequin head for wigs" covers three different tools. A foam display head stores a wig and keeps its shape. A canvas block head is a work surface you can pin a cap to and sew on. A training head has its own hair, so you can practice cuts, color, braids and installs. Buying the wrong one is an easy mistake: a styrofoam head is too soft to build a wig on, and a canvas block is more than you need to keep a wig on the dresser. This guide sorts out which one you need, what size to get and how to look after it.
Mannequin head for wigs: the three kinds
Styrofoam and foam display heads
The lightweight white or black head you see in beauty supply stores is polystyrene foam. Annie's foam wig head, for example, is listed as soft, lightweight polystyrene, 21 inches around and 10 1/2 inches tall, for storing and displaying wigs, hairpieces and styled units. These heads are cheap, light and easy to line up on a shelf. They usually sit on a flat base, so they do not need a stand.
What they are not good at is being worked on. Foam is soft, so pins hold loosely and the surface tears around holes. A foam head can also dent if you lean on it while brushing.
Canvas block heads
A canvas block head is firm, often cork-filled, and covered in tight canvas. It is the standard work surface for wig making: you stretch a dome cap over it, pin it down and sew wefts or set a closure. Headcovers describes its canvas block for styling human hair and synthetic wigs, for display and for hands-free styling on a tripod or stand. Most canvas heads have a mount hole in the neck instead of a flat base. Sizes, fill and pinning are covered in detail in our guide to canvas block heads.
Training heads with hair
Cosmetology students and stylists practice on mannequin heads that come with hair rooted into a scalp. The hair may be human, synthetic or animal hair. Pivot Point's textured-hair line, for example, uses 100% human hair in curl patterns from wavy to coily (its straight-hair model uses yak hair), and lists cutting, coloring, relaxers, thermal styling, twists, braids and hair additions among the things you can practice. A training head is not for holding a finished wig; it is a stand-in for a client's head.
Display heads with faces
Shops also use plastic, fiberglass or painted heads with sculpted faces and makeup to sell wigs. They look good on a shelf or in photos for a wig business, but most are hard-shelled, so you cannot pin into them. Treat them as display only.
Comparison: which mannequin head does what
| Head type | Typical material | Holds pins | Main job | Who it suits |
|---|---|---|---|---|
| Styrofoam / foam head | Polystyrene foam | Loosely | Storage, display, drying | Wig wearers, shops on a budget |
| Canvas block head | Canvas over cork (or foam) | Firmly | Making, sewing, styling | Wig makers, stylists |
| Training head with hair | Hair rooted into a PVC scalp | Into the hair, not the scalp | Practicing cuts, color, braids, installs | Students, stylists |
| Display head with face | Plastic, fiberglass | No | Retail display, product photos | Shops and online sellers |

What to check before you buy
Size
Wig heads are measured around the hairline, like wig caps. For reference, the Jon Renau sizing standard published by Headcovers puts a petite cap at about 21 inches, an average cap at 21.5 inches and a large cap at 23 inches. A 21 inch foam head suits petite and many average caps; a large-cap wig will sit loose and may lose its shape. Canvas block sizes are covered in the canvas block heads guide. Match the head to the wig, not to what is cheapest.
Material and firmness
Press the head with your thumb. If it dents easily, it is foam: fine for storage, poor for work. If it is firm and heavy, it is likely cork. For training heads, check what the hair is. Human hair takes heat and chemical services like a client's hair; synthetic hair may melt under hot tools.
Base or mount
Foam heads usually stand on their own. Canvas blocks and training heads usually have a hole in the neck for a tripod or table clamp. If you buy one of those, budget for a stand. Our guide to wig stands compares tripods, clamps and storage stands.
Face or no face
A sculpted face makes a display look finished and helps you place a hairline in photos. A plain, faceless head is easier to pin and cheaper. For making wigs, facial features do not matter; a correct hairline shape does.
For training heads only
- Hair type and length: match the head to what you will practice. A long, wavy head suits updos and long layers; a short, tightly curled head suits fades.
- Density: denser heads are closer to a real client but take longer to section.
- Scalp material: many training heads have a PVC scalp and face. Pin into the hair, not through the scalp.
Which head suits whom
- You wear wigs and want to store them: one foam head per wig in rotation, or a collapsible stand. Choose a size close to your cap size so the wig keeps its shape.
- You are making your first wig: a canvas block head on a table clamp. A foam head will frustrate you as soon as you try to keep a cap tight.
- You make or install wigs for clients: a cork canvas block for construction, plus a few foam heads to hold finished units for pickup.
- You are in cosmetology school or practicing techniques: a training head with hair close to the texture you want to work on, on a tripod.
- You sell wigs or photograph units: display heads with faces for the shop window and photos; foam heads for stock.
How to use and care for a wig head
Foam heads
- Pin lightly, if at all. One pin at each ear tab is usually enough to keep a stored wig in place.
- Keep foam away from hot tools and hot dryers; polystyrene softens and melts with heat.
- Replace the head once it is torn at the ear tabs or nape, since a torn head snags lace.
Canvas heads
Let the canvas dry fully after a damp wig comes off it, and store it covered. The full routine is in the canvas block heads guide.
Training heads with hair
Pivot Point's care guide for its mannequins is a good baseline for any human hair training head:
- Shampoo the hair before first use. Pivot Point notes that a reddish-brown residue may drip from the wet hair and can stain.
- Comb out tangles before washing, then shampoo with a non-alkaline shampoo and lukewarm water.
- Detangle with a wide-tooth comb from the nape, working from the ends toward the scalp.
- Keep hot tools at 350°F or below on human hair and natural hair mannequins, and skip stove pressing.
- Watch drying time in a cabinet dryer. Pivot Point says cabinet dryers can run 141°F to 145°F, that long exposure to high temperatures can deform and sometimes melt head forms, and that heads should not be left in one overnight.
- Strand test before any chemical service, and keep color and lightener off the scalp.
- Dry the hair and head form completely before storing, and do not leave the head anywhere with extreme temperatures for long, such as a car.
A training head mounts on a tripod or table clamp for practice. Pivot Point lists a 1.9 inch maximum grip opening for its clamp, so check your table edge before buying one.
For more equipment, browse the tools section, or see wig caps if you are setting up to make a wig.
Questions
Which kind of mannequin head do I need for wigs?
It depends on the job. A styrofoam or foam head is enough to store and display a wig, a canvas block head is the one to use for making, sewing and styling wigs, and a training head with its own hair is for practicing cuts, color and braids.
Can you sew a wig on a styrofoam head?
You can pin a cap to one for a quick unit, but styrofoam does not hold pins firmly and crumbles around holes with repeated use. For regular wig making a cork-filled canvas block head holds the cap much better.
What size is a standard styrofoam wig head?
Sizes vary by maker, so check the listing. Annie, for example, lists its foam wig head at a 21 inch circumference and 10 1/2 inches tall, which is close to a petite cap (about 21 inches), so a large-cap wig may sit loose on it.
Can I use a flat iron on a mannequin head with human hair?
On a human hair training head, yes. Pivot Point says hot tools should not go above 350°F on its human hair and natural hair mannequins and does not recommend stove pressing. Synthetic hair may melt, so check what the head's hair is first.
How do I keep a wig head from tipping over?
Put it on a stand. Foam heads usually sit on a flat base, but canvas blocks and training heads are made to mount on a tripod or table clamp through the hole in the neck.
Sources
- Annie — Foam Wig Head 21" Polystyrene Hairpiece Display
- Headcovers.com — Professional Long Neck Canvas Wig Block Head
- Pivot Point — Mannequins for texture experts
- Pivot Point — Mannequin care and maintenance
- Pivot Point — Tripods and holders pro tips
- Headcovers.com — Wig size guide (Jon Renau measuring standards)
Read next
Canvas wig head: how to choose a canvas block head for wig making
Size, fill, neck length and mounting: what separates a canvas block head you can sew on from one that only holds a wig.
Wig stand tripod, table clamp or storage stand: how to choose
A tripod for working standing up, a clamp for a desk, a collapsible stand for drying and storage: what each one does and what to check.
How to wash a wig: a human hair wig wash at home, step by step
Detangle, wash in the direction the hair falls, keep conditioner off the knots and dry the cap on a stand before you style.