Guide
How to put on a lace front wig: prep, cut, secure and melt
A beginner's install from wig cap to melted hairline, with the glue, tape and glueless options side by side and a safe way to take it off.
Published
Knowing how to put on a lace front wig comes down to five jobs done in order: flatten your hair, cut the lace to your hairline, secure the front, melt the lace so it lies flat, and finish the hair. By the end of this guide you will have a wig that sits at your natural hairline, held with glue, tape or a glueless band, and you will know how to take it off without pulling at your edges. The steps are the same for a lace front and a frontal wig; a frontal simply has lace running ear to ear, so there is more lace to cut and secure.
What you'll need
Essentials
-
Wig cap
: flattens your hair and gives the lace a smooth base; a satin-lined cap is gentler on your hairline. -
Small sharp scissors
: for trimming the lace in short zigzag snips along the hairline. -
Rat-tail comb and clips
: part the wig, hold the hair back off the lace and keep it out of the adhesive. -
Your securing method
: lace glue, lace tape, or a wig grip or elastic band for a glueless install. -
Cotton swabs and a skin cleanser
: clean oil and makeup off the hairline so the adhesive can grip.
Optional
-
Lace melt spray and a melt band
: flattens the lace into the skin for a more natural hairline. -
Blow dryer with a cool setting
: speeds up drying of glue and melt spray without heating the lace. -
Adhesive remover
: the remover made for your glue or tape, for taking the wig off without pulling.
Choose how you will secure the wig
Decide this before you start, because it changes the prep. There are three common ways to hold the front of a lace wig down.
| Method | Hold | Removal | Best for |
|---|---|---|---|
| Glueless (band, combs, wig grip) | Lightest | Take it off any time | Daily wear, beginners, sensitive skin |
| Lace tape | Medium to long, depending on the tape | Remover, then wash | A cleaner install that is still easy to adjust |
| Lace glue | Strongest and flattest | Remover, then wash | Longer installs and the most "melted" look |
If this is your first install, start glueless or with tape. Both let you reposition the wig, so a mistake is easy to undo. Glue gives the flattest hairline but takes practice to apply thinly and to remove gently. The American Academy of Dermatology advises choosing sewn-in weaves over bonded ones where glue is concerned, which is worth keeping in mind if you plan to wear adhesive often. For the details of each product, see our guides to wig glue and wig tape.
Prep your hair and skin
Flatten your hair
Wash, condition and detangle, then let your hair dry completely. Curl Centric points out that damp hair under a cap can stay damp for a long time. Braid it down flat or slick it back so there are no lumps under the wig.
Put on the wig cap
Place the cap at your forehead first, then pull it back over your head. Keep the front edge just behind your hairline so it does not show through the lace. It should be snug, not tight. A satin-lined cap is gentler on your hairline than cotton or nylon. If the cap's color does not match your skin, dab a little foundation along the front edge.
Clean the hairline
Any adhesive grips better on clean skin. Wipe oil and makeup from the area where the lace will sit; Wigs.com uses a cotton swab dampened with alcohol, and Walker Tape uses 99% alcohol. Let it evaporate completely. If you are using glue or tape for the first time, do a patch test a day or two before the install (see the safety section below).
How to put on a lace front wig and cut the lace
Line up the hairline
Put the wig on from front to back, the way you put on the cap. Line up the wig's hairline with your own, a little in front of it rather than behind, and check that the ear tabs sit evenly on both sides. Clip the hair back so you can see the lace clearly.

Cut the lace
Lift the extra lace off your skin and trim it in small zigzag snips; a zigzag edge blends better than a straight line. Curl Centric suggests starting about an eighth of an inch in front of the wig's hairline and leaving extra at first, because you can always trim more but you cannot add lace back. Cut around the ear tabs and follow the line of your sideburns. Pre-cut lace may need little or no trimming.
Do not cut right at the knots. Lace cut too close to the hairline can unravel and lets hair shed from the front.
Secure the front
Pick one of the three options below and follow the directions on your product, since drying times and the number of coats differ from one adhesive to the next.
Glueless install
Tighten the adjustable elastic band at the back so the wig sits snugly, then press the combs into your braids or cap. A wig grip headband under the wig adds grip at the sides. You can add a melt band and a light melt spray on top for a flatter front without glue. To take it off, you unfasten the band or grip and lift the wig away.
Tape install
- Cut short strips of lace tape. Wigs.com uses small pieces of about 2 inches for the hairline.
- Peel one side of the liner and press the tape onto the inside of the lace or onto your skin, close to the hairline but not so close to the edge that it shows through.
- Peel the second liner just before placing the wig, without touching the adhesive.
- Set the wig in place and press the lace firmly onto the tape one section at a time, without sliding it.
Walker Tape's install guide adds a positioning spray at this stage; the more you spray, the more time you have to adjust before the tape grabs.
Glue install
- Fold the lace back and clip the hair away so no glue touches it.
- Apply a thin layer of glue along your hairline, on skin only, not on your own hair or edges.
- Wait as long as the label says. EBIN's directions for its Wonder Lace Bond, for example, say to wait until it turns clear and tacky.
- Lay the lace onto the glue starting at the center of the forehead and working outward to each side.
- Hold it down until dry. Some glues call for more than one coat for extra hold; add them one thin layer at a time.
Thin layers matter more than the amount of glue. Thick glue turns white, shows through the lace and is harder to remove.
Melt the lace and blend it
Melting means pressing the lace flat into the adhesive so it disappears into your skin. Spray a lace melt spray along the hairline, press the lace in and dry it on a cool setting. Then tie a melt band or a satin scarf around your hairline. The band should press the lace flat without leaving marks, giving you a headache or pulling at your edges. Leave it on for the time your product gives; EBIN's directions for one of its melt sprays say 15 to 20 minutes. Our lace melt spray guide covers this step in detail.
If the lace still looks lighter than your skin, blend it with foundation, concealer or a lace tint in your skin tone.
Style the hairline
Take off the band, unclip the hair and style. If you want baby hairs, cut and lay them on the wig itself, not on your own edges, and use a light hand. Curl Centric, citing the American Academy of Dermatology, suggests caring for your own edges with water-based gels and conditioner.
Common mistakes
- Cutting too much lace at once. Trim in stages and step back to look in the mirror.
- Glue on your hair. Adhesive belongs on clean skin only; on hair it pulls strands out at removal.
- Thick layers of glue. They stay white and cloudy, show through the lace and do not hold any better.
- Skipping the skin prep. Oil and makeup are the usual reason a hairline lifts early.
- A band that is too tight. Firm pressure is enough; pain or marks mean it is too tight.
- Peeling glued lace off dry. This is how edges get damaged.
Taking the wig off
Never peel off glued or taped lace. Saturate the lace edge with the remover made for your adhesive, wait for it to soften, add more where it still holds, and lift the lace gently. Walker Tape's directions for its alcohol-based Lace Release, for example, are to saturate the hairline, wait 30 seconds, spray again and then lift gently. Wash the leftover adhesive off your skin and off the lace afterward. A glueless wig just needs the band or grip unfastened.
Patch testing and your hairline
Glues, tapes and melt sprays sit on your skin, so patch test any new product first. Walker Tape's method is to clean a small spot, usually behind the ear, apply a thin layer, cover it with a bandage, leave it for 24 to 48 hours without getting it wet, and look for redness, itching or swelling before you go ahead. Do not apply adhesive to broken or irritated skin. Give your hairline breaks between adhesive installs. If you get a reaction or notice thinning around your hairline, stop using the product and see a board-certified dermatologist.
For more on keeping wigs in good shape between installs, browse the wig care section.
Questions
How do you put on a lace front wig for beginners?
Flatten your hair under a snug wig cap, line the wig up with your natural hairline, trim the extra lace in small zigzag snips, then secure it with an adjustable band, tape or glue. Start glueless or with tape if you are new, because both are easier to adjust and remove than glue.
Can you put on a lace front wig without glue?
Yes. Many lace front wigs have an adjustable elastic band and combs, and a wig grip headband adds hold; you can also use lace tape instead of glue. Glueless installs are easier to take off daily but usually feel less secure along the hairline.
How far from the hairline should you cut the lace?
Leave a little lace in front of the wig's hairline rather than cutting right at the knots. Curl Centric suggests starting about an eighth of an inch in front of the hairline and trimming more later if needed, since cut lace cannot be put back.
How long should a melt band stay on?
Follow the time on your melt spray or glue. Directions differ: one EBIN lace melt spray says to tie the lace down for 15 to 20 minutes, and the band should press the lace flat without leaving marks or pulling your edges.
Is wig glue bad for your edges?
Glue that is pulled off dry, or used over your own hair, can break fragile hairline hairs, which is why makers say to dissolve it with a remover. If you notice thinning or irritation along your hairline, stop using adhesives and see a board-certified dermatologist.
Sources
- Curl Centric — How to put on a lace front wig for beginners
- Walker Tape — Patch test
- Walker Tape — Full lace front install with maximum wear tape
- Walker Tape — How to remove Walker Tape products
- Wigs.com — How to use wig tape and glue
- EBIN New York — Wonder Lace Bond Waterproof Adhesive, Extreme Firm Hold
- EBIN New York — Wonder Lace Bond Lace Melt Spray, Sports Edition
- American Academy of Dermatology — Hairstyles that pull can cause hair loss
Read next
Wig glue: types, hold times and how to choose a lace adhesive
What lace glue does, how the types differ, what the labels mean, and how to apply and remove it without hurting your skin or edges.
Wig tape: hold types, tape vs glue, and how to apply and remove it
What lace tape does, how the hold tiers and formats differ, and the steps for a clean tape install and a gentle take-down.
Wig cap guide: nylon, HD, mesh and dome caps and how to choose
Which cap goes under a wig and which one you build a wig on, how to match the color to your skin, and how to wear one over braids or long hair.