Buying guide
Lace melt spray: what it does and how to use it with a melt band
How melting sprays flatten lace into the skin, what to check on the can, the steps with a melt band, and why hairspray is not the same thing.
Published
Lace melt spray is a holding spray made for lace wigs. You spray it along your hairline, lay the lace into it, dry it and tie a melt band over it, and the lace dries flat against your skin so the edge of the wig seems to disappear. That is what people mean by a "melted" hairline. This guide covers what the spray does, the kinds you will find, what to check on the can, how to use it with a melt band, how it compares with a strong-hold hairspray, and how to keep it from building up on your lace.
What you'll need
Essentials
-
Lace melt spray
: holds the lace flat against the skin; choose the hold level and formula that suit your install. -
Melt band or satin scarf
: presses the lace into the spray while it dries. -
Blow dryer with a cool setting
: most melt sprays are dried on the coolest setting.
Optional
-
Lace bond remover
: loosens the spray when you take the wig off and keeps residue from building up. -
Concealer or lace tint
: blends lace that is lighter than your skin.
What lace melt spray does
Curl Centric describes melting as saturating the visible lace with a holding product and drying it, so the lace turns flat and translucent and blends into the scalp. The spray does two jobs at once: it holds the lace down, and it takes away the slight lift and texture that make lace visible. On its own it usually holds more lightly than glue; over glue or tape it flattens the lace and adds some hold.
Types of lace melt spray
| Type | What it is for | Hold | Watch for |
|---|---|---|---|
| Glueless melt spray | Melting and holding without glue | Light to medium | Lifts sooner with sweat and oil |
| Extra or maximum-hold spray | More hold, often sold for sweat and activity | Medium to strong | More residue in the lace |
| Tinted melt spray | Melting while adding a skin-tone tint to the lace | Varies | Matching the shade to your skin |
| Aerosol vs pump | Same job, different can | Varies | Aerosols are flammable |
EBIN's Wonder Lace Bond Lace Melt Spray is an example of the stronger kind: the maker calls it "maximum hold" and water-resistant, and says it can be used alone or layered with its adhesives for extra hold. Its Sports Edition aerosol is marketed for activity and carries the usual aerosol warnings.
What to check before you buy
Hold level
Match the hold to your install. For a glueless wig you take off at night, a lighter spray is easier to remove. For a glued install, the spray mostly flattens the lace, so you do not need the strongest one.
Aerosol or pump
Aerosols are flammable. EBIN's aerosol page says to keep the can away from sunlight and temperatures above 120°F, never spray near a flame, use it only in a ventilated room and never spray it into your eyes.
Ingredients and skin
Read the ingredient list if you know you react to anything, and patch test a new spray before using it along your hairline.
Removal
Check which remover the maker suggests. EBIN's aerosol page recommends a lace bond remover for quicker, safer removal and to help protect your edges.
Which type suits whom
- Glueless wig worn for a day: a glueless melt spray in light layers, plus the wig's band or combs for most of the hold.
- Glued or taped install: any melt spray, used mainly to flatten the lace over the adhesive; you do not need the strongest hold.
- Sweat, workouts or humid weather: a spray the maker positions for activity or water resistance, and expect to touch it up.
- Lace lighter than your skin: a tinted spray in your shade, or a clear spray plus concealer or lace tint.
- Sensitive skin: the simplest formula you can find, a patch test first, and a remover that the maker recommends.
How to use lace melt spray with a melt band
- Secure the wig first. Put on the wig, line it up and cut the lace. If you are using glue or tape, apply it and let it set as its directions say.
- Work in sections. Fold the lace back and spray along your hairline, one section at a time. Curl Centric suggests small, inch-wide sections and letting the product sit a minute or two until tacky.
- Lay the lace. Press the lace into the spray, working from the center outward.
- Dry on cool. EBIN's directions say to dry with a blow dryer or fan on its coolest setting. If your wig is synthetic, check that it is heat safe before using any warm air; Curl Centric warns that a hot dryer can make fibers that are not heat safe melt together.
- Tie the melt band. Wrap a melt band or satin scarf around your hairline over the lace. It should press firmly without leaving marks, causing a headache or pulling at your edges.
- Wait. Leave the band on for the time your product gives. EBIN's directions say 15 to 20 minutes for one of its melt sprays and 16 to 20 minutes for its aerosol; Curl Centric gives around 5 to 10 minutes. Then remove the band and style.
- Repeat if needed. EBIN says to repeat as needed for more hold. Each extra layer adds hold, but also adds residue.
If the lace still looks lighter than your skin after melting, blend it with concealer or a lace tint. For the full install from wig cap to styled hairline, see how to put on a lace front wig.

Lace melt spray vs strong-hold hairspray
Strong-hold hairspray is still often suggested for melting lace. The two are not the same product.
- What it is made for. got2b's page for Glued Blasting Freeze Spray describes it as a hairspray for styling hair, sprayed from about 30 cm (about 12 inches), and does not mention wigs or lace. A lace melt spray is labeled for lace and gives directions for use along the hairline.
- Ingredients. The got2b spray lists dimethyl ether and denatured alcohol as its first ingredients.
- Instructions and removal. A melt spray comes with tie-down times and a recommended remover; a hairspray does not.
If you choose to use a hairspray anyway, patch test it on your skin first, use it lightly and wash it out of the lace after each wear.
Preventing buildup
Melt spray that is never fully removed dries in layers in the lace. Over time the lace can turn stiff, cloudy or shiny, and that shows at the hairline.
- Use thin layers. Build hold with light passes rather than one heavy coat.
- Spray the hairline, not the hair. Keep product on the lace area so it does not stiffen the hair.
- Remove it properly. Use a lace bond remover to loosen the spray when you take the wig off, rather than pulling the lace away from your skin.
- Clean the lace between installs. Wash residue out of the lace before you melt it again, following the care directions for your wig.
Melt spray and your skin
Melt spray sits on your hairline for as long as you wear the wig, so test a new one on a small patch of skin behind your ear 24 to 48 hours ahead, as Walker Tape suggests for adhesives, and skip it if the spot turns red, itchy or swollen. Keep it out of your eyes and off broken or irritated skin. If a spray irritates your skin or you notice thinning along your hairline, stop using it and see a board-certified dermatologist.
For stronger hold than a spray can give, see our guides to wig glue and wig tape, or browse the wig care section.
Questions
What does lace melt spray do?
It is a holding spray made for lace wigs: you spray it along the hairline, press the lace into it and dry it, so the lace lies flat and blends into the skin. Some formulas are sold as a light glueless hold on their own, others as a layer over lace glue.
How long do you leave a melt band on?
Follow the time on your can. EBIN's directions for its Wonder Lace Bond melt sprays give 15 to 20 minutes for one version and 16 to 20 for another, while Curl Centric suggests around 5 to 10 minutes; the band should be firm but not leave marks or pull your edges.
Is got2b the same as lace melt spray?
No. got2b Glued Blasting Freeze Spray is a strong-hold hairspray, and its maker's page describes it for styling hair and does not mention wigs or lace. A melt spray is labeled for lace wigs and comes with directions for that use.
Can you use lace melt spray without glue?
Yes, many melt sprays are sold for glueless installs, and EBIN says its melt spray can be used alone or layered with its adhesives. Expect a lighter hold than glue; layering more spray builds hold but also builds residue.
Is lace melt spray safe for skin?
It is a cosmetic meant for external use on the hairline, but any product can irritate some people, so patch test it first and keep it out of your eyes. Aerosol versions are flammable; keep them away from heat and flames and use them in a ventilated room.
Sources
- EBIN New York — Wonder Lace Bond Lace Melt Spray, Sports Edition
- EBIN New York — Wonder Lace Bond Lace Melt Aerosol Spray, Sports Edition
- Curl Centric — What is a melted hairline wig?
- Curl Centric — How to put on a lace front wig for beginners
- got2b — Glued Blasting Freeze Hairspray
- EBIN New York — Wonder Lace Bond Waterproof Adhesive, Extreme Firm Hold
- Walker Tape — Patch test
- American Academy of Dermatology — Hairstyles that pull can cause hair loss
Read next
How to put on a lace front wig: prep, cut, secure and melt
A beginner's install from wig cap to melted hairline, with the glue, tape and glueless options side by side and a safe way to take it off.
Wig glue: types, hold times and how to choose a lace adhesive
What lace glue does, how the types differ, what the labels mean, and how to apply and remove it without hurting your skin or edges.
HD lace wigs vs transparent lace vs brown lace: what the labels really mean
Thinner lace blends more easily and tears more easily. Here is how the three common lace types trade off, and why the HD label varies by seller.