Skip to content
Weave Assist Studio

Buying guide

Interlocking tool for locs: the types, the right size and the rotation

An interlocking tool pulls the end of a loc back through its own root. Here is how the types differ, how to pick a size and how to use one without thinning your roots.

Published

The back of a person's head with short locs and a headband, the parted sections visible
Photo: Brett Sayles / Pexels

An interlocking tool for locs is a small hand tool that holds the end of a loc and threads it back through the loc's own root. Repeated in a set rotation, that pulls new growth into the loc and locks it to the scalp with no twisting and no gel. Interlocking locs is used both to start locs and to maintain them, and it suits every texture, including looser curls that won't hold a palm roll. This guide covers the main types of interlocking tool, how to size one, how to interlock step by step and how to keep the work gentle on your roots. We have not tested tools ourselves; the descriptions come from a published patent and loc education sources.

What you'll need

Essentials

  • Interlocking tool sized to your locs

    : its eye or latch holds the loc end while the tip passes through the root.
  • Duckbill or sectioning clips

    : keep finished and unfinished locs apart so you don't interlock the wrong hair.
  • Mirror (a hand mirror plus a wall mirror)

    : lets you see the back of your head when you maintain your own locs.

Optional

  • A second, smaller tool

    : for finer locs at the hairline or nape.
  • Micro crochet hook

    : tucks in stray hairs that the interlocking tool leaves behind.

What an interlocking tool does

Interlocking replaces the twisting motion of a retwist with a looping one. Curl Centric describes it as pulling each loc through its roots in a set pattern, which incorporates the new growth. Because the hair is knotted in rather than twisted, interlocked roots hold through washing and exercise, and sessions can be further apart: the OpenExamPrep study guide gives every 6 to 8 weeks for interlocking, against every 3 to 4 weeks for palm rolling.

Types of interlocking tool

Eye-and-tail tools (the "nappy locs tool" design)

One documented design is the Nappy Locs Tool, described in a US patent application by Debra Belton (filed in 2003, published in 2004 and later abandoned). It has a smooth round shaft with a thin tail at one end and, at the other, a hollow opening (the "bulb") with a narrower "pinch" beside it. The loc end sits in the pinch while the tail pierces the base of the loc; the tool is then pulled through, carrying the end with it. The patent says the smooth tail allows insertion "without sawing, shredding, and breakage of the lock strands," and that the pinch holds the loc "and does not damage the ends or grasp hairs from neighboring locks."

The patent describes using the tool straight, with the tail hooked or curved into a semicircle; its preferred material is sterling silver wire, and it says the tool "can be fashioned in different sizes to accommodate various dreadlock sizes."

Latch-style interlocking tools

Other tools hold the loc with a small latch near the tip instead of an open eye: the loc end sits under the latch while the tip goes through the root. The OpenExamPrep study guide describes interlocking as threading the hair tip through the root base with "a specialized latch hook or loc tool," and Curl Centric names a latch hook as the tool interlocking needs. Check that the latch opens and closes smoothly; a latch that sticks will catch hair.

Sisterlocks tool

Sisterlocks, a trademarked locking system, uses its own tool and a proprietary parting and locking technique. Curl Centric notes that the technique is taught only in a Sisterlocks certification class or boot camp, and the official site offers retightening classes for Sisterlocks wearers once their locks are stable and no longer slipping. If you have Sisterlocks, follow your consultant's advice about tools. See micro locs vs Sisterlocks for how the two differ.

Micro crochet hooks

Crochet hooks are a different tool, though they often sit next to an interlocking tool in a loc kit. Going Natural describes a loctician using a crochet hook to make instant locs, knotting and matting the hair from root to tip, and a fine hook can also pull loose hairs back into a loc. They do not loop the loc through its root the way an interlocking tool does. Our crochet hook guide covers them in detail.

Type How it holds the loc Best for What to check
Eye-and-tail tool Loc end sits in an open eye or pinch Most traditional locs and microlocs Smooth tail and eye with no burrs; eye fits your loc width
Latch-style tool A latch closes over the loc end People who find the eye slips Latch moves freely and closes fully
Sisterlocks tool Used with the Sisterlocks method Sisterlocks only Use as taught by your consultant
Micro crochet hook Tiny hooks catch loose hairs Tucking in frizz, instant locs Hook size; smooth stainless tip
The back of a person with arms raised over the head and short locs, against a plain backdrop
Photo: Olha Ruskykh / Pexels

How to choose an interlocking tool

Size

Size matters more than brand. The eye or latch has to hold the loc end securely, and the tip has to pass through the root without forcing it open. A tool that is too large forces the root open; one that is too small will not hold a thick loc. If your locs are smaller around the hairline or at the nape, a second, smaller tool, or a tool with a different size at each end, saves you from forcing one size everywhere.

Material and finish

The patent's design is metal wire. Whatever the material, run a finger along the tip, eye and tail: any rough edge or burr will snag and break hair.

Shape and length

Tools come straight or curved; the patent itself describes a version with the shaft bent into a semicircle. Which is easier is a matter of how you hold the tool. A longer shaft is easier on long locs, since the whole loc has to pass through after the tip.

Which tool suits whom

  • Microlocs or small traditional locs: a small eye-and-tail or latch tool, plus a smaller second size for the edges.
  • Medium to large locs: a larger tool, chosen so the eye holds the loc without squeezing it.
  • Sisterlocks: the method's own tool, used as your consultant shows you.
  • Frizz and stray hairs only: a micro crochet hook, not an interlocking tool.

How to interlock locs, step by step

Start with clean, dry hair, and clip away everything except the row you are working on.

  1. Hold one loc and find its square of new growth at the root.
  2. Place the loc end in the tool's eye or latch.
  3. Push the tip of the tool through the middle of the new growth at the root, from one side to the other.
  4. Pull the tool through, bringing the whole loc through its own root, then remove the tool.
  5. Change direction and repeat, following one of the rotations below, until the new growth is locked close to the scalp.
  6. Move to the next loc.

The 2-, 3- and 4-point rotations

Curl Centric describes three patterns:

  • 2-point: west to east, then north to south. Gives puffier, less dense locs.
  • 3-point: east to west, north to south, east to west, south to north. Denser, but less neat.
  • 4-point: east to west, north to south, west to east, south to north. The most popular, with the neatest, densest roots that are least likely to slip.

Why the direction changes

The OpenExamPrep study guide explains why you rotate: repeating the same entry direction can split the base of the loc, which it calls yoking. Alternate directions on each pass, such as 12 to 6, then 3 to 9, then 6 to 12, then 9 to 3.

Interlocking without damage

Curl Centric warns that interlocking done incorrectly can lead to thinning and breakage over time, and that interlocking leaves a braid-like pattern that takes a while to go away. Its comparison also notes that if you switch from palm rolling to interlocking, your locs will be thinner at the roots than at the ends. The American Academy of Dermatology lists locs among the styles that can cause traction alopecia when they are too tight.

  • Leave the root relaxed. The American Academy of Dermatology says a style that hurts is too tight, and it lists pain, stinging, crusts and tenting of the scalp as reasons to take a style down.
  • Don't interlock too often. Sessions about 6 to 8 weeks apart are the usual guidance; more frequent work thins the roots.
  • Keep your edges gentle. The AAD recommends thicker locs and loosening styles around the hairline, where traction hair loss often shows first.

If you notice thinning, broken hairs or soreness at your hairline, stop and see a board-certified dermatologist. For maintaining by twisting instead, see retwisting locs; to start locs from scratch, see starter locs.

Care for your tool

Wipe the tool clean after each session and store it in a case so the tip and eye don't bend. Replace it when the tip is bent, the eye is out of shape or you feel any roughness, since a damaged tool catches and breaks hair.

Questions

What is an interlocking tool for locs?

A small hand tool, usually metal, that holds the end of a loc and passes it back through the loc's own root. Repeating that in a set pattern pulls new growth into the loc without gel or twisting.

What size interlocking tool do I need?

One whose eye or latch holds the loc end securely and whose tip passes through the root without forcing it open. Tools come in sizes for different loc widths; if your locs are smaller at the hairline or nape, a second, smaller tool helps.

Can I use a Sisterlocks tool on my locs?

Sisterlocks are made with their own tool and a proprietary technique taught only in Sisterlocks certification classes, and their retightening is done by consultants or by clients who have taken an official retightening class. For locs that are not Sisterlocks, use a general interlocking tool sized to your locs.

How often should you interlock locs?

Interlocking holds longer than palm rolling, so sessions are spread further apart; loc education sources usually give about every 6 to 8 weeks. Interlocking too often thins the roots.

Is interlocking bad for your hair?

Not when it is done correctly and with relaxed tension. Interlocking that is too tight or done in the wrong pattern can cause thinning, breakage and traction alopecia, so stop if the scalp hurts and see a dermatologist if you notice thinning.

Sources